PE woven layflat hoses, also known as flat woven hoses, have a different construction compared to traditional PE layflat hoses. They are made by weaving high-strength polyester yarns into a flat fabric and then coating it with a layer of polyethylene. The diameter and thickness of PE woven layflat hoses can vary depending on the specific manufacturer and application. However, here are some general guidelines:

1. Diameter: PE woven layflat hoses typically range in diameter from 1 inch (25 mm) to 6 inches (150 mm). These hoses are commonly used for irrigation and water transfer applications in agricultural settings, where smaller diameters are often sufficient. The diameter is selected based on the required flow rate and the specific needs of the application.

2. Thickness: The thickness of PE woven layflat hoses can vary, but it is generally between 0.5 mm to 1.5 mm. The thickness is determined by the desired strength, durability, and flexibility of the hose. Thicker hoses provide increased resistance to abrasion and punctures, making them suitable for more demanding applications.

It's important to note that the actual diameter and thickness of PE woven layflat hoses can be customized based on specific requirements. Manufacturers may offer different options to meet varying needs in terms of strength, pressure rating, and other performance characteristics.

When selecting a PE woven layflat hose, it's essential to consider factors such as the operating pressure, flow rate, compatibility with the intended fluids, and the environmental conditions in which the hose will be used. Consulting with the manufacturer or supplier can provide more accurate and detailed information about the available options and their suitability for specific applications.